ES · EN
Contact us
What problem each client had and how we solved it.
Projects with companies and institutions, and R&D projects.
A major multinational urban services concessionaire · Since 2024
We detect waste located next to the bins during the route. We fitted the kit to the vehicles, process on board and send a georeferenced, anonymised alert to their system, running 24 hours a day. In service in Madrid, Valladolid, Zaragoza and L'Hospitalet.
See the project →
A major multinational urban services concessionaire
We fit a 360° LiDAR, a camera and RTK-corrected GNSS on a vehicle that drives with the traffic and, with Seevia ATLAS, we locate every tree and empty tree pit, measure its height, trunk and crown, and cross-check the result with the existing inventory to keep it up to date.
See the project →
A major wholesale food market · Since November 2025
We anticipate congestion at gates and roundabouts with the existing infrastructure: we use the security cameras already installed and give the control centre counts per lane.
See the project →
A solar engineering firm · 2024
Segmentation of every panel in images of large photovoltaic plants, under changing light and angles, as the basis for reviewing the installation systematically.
See the project →
A major engineering group · 2025
We advised on and co-developed a complete simulation stack to digitise advanced driver assistance systems (ADAS) and put their failures in the context of each road and environment.
See the project →
A light electric vehicle manufacturer · February to May 2025 (phase 1)
We integrated our remote driving over 5G and autonomous safety capabilities into a small electric vehicle, with on-board AEBS emergency braking.
See the project →
A major European car manufacturer (OEM) · Obelix project · Since October 2023
We developed several autonomous driving modules for the vehicle: from automatic map generation from sensor recordings and the design of obstacle tracking systems to the programming of ASIL-B safety ECUs.
See the project →
An autonomous mobility company · 2024
We gave the autonomous shuttle a complete, robust perception and safety layer. We integrated three front cameras in a fan layout, four solid-state LiDARs and GNSS with IMU, together with our 3D perception and localisation software based on sensor fusion.
See the project →
A tier-1 automotive supplier · 2024
Through simulation, we designed a complete sensor suite for an intelligent recording vehicle, minimising blind spots.
See the project →
GENIUS · R&D project · July 2026 to June 2029
We lead this use case: the perception of the shuttle that picks up drivers at the vehicle terminal runs on a 5G/6G network server located next to the antennas (edge), with on-board perception as backup if the network degrades.
See the project →
EPIC · R&D project · December 2025 to June 2026
We tested whether the perception of an autonomous vehicle with LiDAR and camera can run on a 5G network server located next to the antennas (edge). Tests at the Fondazione LINKS site in Turin.
See the project →
ASVIC · R&D funded by CDTI · November 2024 to December 2025
We designed the fixed camera and processing system for the site of a major European car manufacturer (OEM) to give the autonomous vehicle information its own sensors cannot see: it detects vehicles and pedestrians, free spaces, people waiting and improper use, and sends alerts to the vehicle and the control centre. Validated with real recordings and in simulation.
See the project →
Tell us your case and we will look at it with your data.